|
Advantages of a Modular System
A series of modular BM600 series PET
Blow Molding Machine systems offers
numerous advantages over a single, highly
automated machine.
* Minimize your initial investment
by starting small.
* Add additional systems economically
as your business grows.
* Bottles of different sizes can be
produced simultaneously to meet your
exact requirements.
* Change over from one size to another
can be completed simply and quickly.
* The tooling costs (molds) are low
since the design of the system is simple.
* Systems can be dedicated to produce
particular bottle sizes. A short operator-training
period due to the simplicity of the
design.
* Maintenance costs are kept to a minimum
and highly-trained personnel are not
required.
DIMENSIONS |
| |
BLOW MOLDER |
PRE HEATER |
| |
Actual Size |
Shipping Specs |
Actual Size |
Shipping Specs |
| Height: |
64" (163 cm) |
72" (183 cm) |
36" (92 cm) |
36" (92 cm) |
| Width: |
22" (56 cm) |
28" (71 cm) |
20" (51 cm) |
26" (66 cm) |
| Depth: |
50" (127 cm) |
58" (147 cm) |
45" (114 cm) |
52" (132 cm) |
| Weight (lbs.): |
2,600 lbs. |
3,200 lbs. |
150 lbs. |
200 lbs. |
| Weight (kg): |
1,182 kgs. |
1,455 kgs. |
68 kgs. |
91 kgs. |
ELECTRICAL
SPECIFICATIONS |
| Voltage: |
240 Volt standard
(other voltages available) |
| Phase: |
Single Phase - Blow
Molder & Preheater |
| |
Three Phase - Air
Compressor |
| Amps: |
BM600 Blow Molder
- 10 amp |
| |
Preheater - 40 amp |
| |
Air Compressor -
determined by size |
AIR
REQUIREMENTS |
| Air Pressure: 175
- 250 psi (17 bar) depends on size/shape |
| Volume: 18 SCFM (per
Blow Molder) |
| Quality: Oil Less,
Clean and Dry |
Contact
us for a quote.
| 
