The Niagara+ Pyrolox Filter efficiently removes iron (up to 10ppm), manganese (5ppm) and hydrogen sulfide (3ppm) from your water supply. Pyrolox is not effective on waters with a pH level less than 6.5. Pyrolox is a logical alternative to chlorination, greensand and birm when used for hydrogen sulfide, iron, and manganese.
More Information about Iron Removal
Pyrolox Filter
A naturally mined ore, Pyrolox is a mineral form of manganese dioxide which has been used in water treatment for more than 75 years. Pyrolox is a granular filtration media for hydrogen sulphide, iron and manganese reduction. Pyrolox functions as a catalyst, but itself remains relatively unchanged.
Pyrolox works on a principle whereby the hydrogen sulphide, iron and manganese are oxidized and trapped on the media while simple backwashing, cleans the bed. No chemical regeneration is required, nothing is imported into the drinking water and Pyrolox has a high capacity for low contaminant concentrations.
Because of its heavy weight, it is important that Pyrolox filters are backwashed properly to insure adequate bed expansion and continued service life.
These Pyrolox automatic backwash systems are equipped with the FleckŪ 2510 water conditioning control valve.
 |
|
Valve
Specifications
|
| Valve
Material |
Noryl
|
| Inlet/Outlet |
1" or 3/4"
|
| Cycles* |
{5}
|
|
Flow
rates (50 PSI Inlet) - Valve Alone
|
| Continuous
(15 PSI Drop) |
19 gpm
|
| Peak
(25 PSI Drop) |
24 gpm
|
| CV** |
5.0
|
| Max.Backwash
(25 PSI Drop) |
17 gpm
|
|
Regeneration
|
| Downflow/Upflow |
Downflow
|
| Adjustable |
Yes
|
| Time
Available |
164 minutes
|
|
Meter
Information
|
| Meter
Accuracy Range |
.25 - 15 gpm +/- 5%
|
| Meter
Capacity Range |
Standard: 125-2,125 gal.
Exendedt: 625-10,625 gal.
|
|
Dimensions
|
| Distributor
Pilot |
1"
|
| Drain
Line |
1/2" Q.C
|
| Brine
Line |
3/8"
|
| Mounting
Base |
2-1/2"-8 Straight Q.C
|
| Height
from top of tank |
7-1/2"
|
| Tank Application - can regenerate/backwash the
following |
|
Water Softener
|
6"-16"
diameter (limited by maximum injector size)
|
|
Iron
Filter
|
8"-16"
diameter (based on 10 gpm per sq. ft)
|
|
Sediment
Filter
|
8"-16"
diameter (based on 10 gpm per sq. ft)
|
|
Carbon
Filter
|
8"-16"
diameter (based on 10 gpm per sq. ft)
|
|
Neutralizing
Filter
|
8"-16"
diameter (based on 10 gpm per sq. ft)
|
|
Additional
Information
|
| Electrical
Rating |
24v,110v,220v - 50 Hz, 60 Hz
|
| Pressure |
Hydrostatic: 300 PSI
Working: 20 - 125 PSI
|
| Temperature |
34° - 110° F
|
**Cv-Flow rate of valve alone at 1 psi pressure drop

Shop securely at Excelwater.com


|