Our high quality Activated Carbon Water Filters remove chemicals, chlorine, tastes and odors from your water supply. Our Catalytic Carbon filters will reduce Hydrogen Sulfide as well.

All Carbon filter systems include the following: (unless otherwise stated)

- Specified resin tank size with 1" riser tube and top distributor basket

- Specified amount of Granular Activated Carbon or Catalytic Carbon

- Fleck 5600 or 2510 3/4" Timer Control Backwash valve (except on upflow models)

- Your choice of one of the following four connections: 3/4" or 1" Noryl Yoke, 3/4" or 1" Stainless Steel Bypass Valve.

View All Models Here Fleck 5600 Valve Specifications Fleck 2510 Valve Specifications Download Carbon Media Specifications Download Catalytic Carbon Media Specifications

	Fleck 5600 Auto Backwash Carbon Filters
	Fleck 2510 Auto Backwash Carbon Filters
	Fleck 5600 Catalytic Carbon Filters
	Fleck 2510 Catalytic Carbon Filters

Superior Quality Granular Activated Carbon

Granular Activated Carbon (GAC) is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as herbicides, pesticides, industrial chemicals, chlorine and trihalomethanes (THMs). Carbon is extremely porous and provides a large surface area for contaminants to collect. It also removes odors, color and tastes. These filters will also trap sediment and particulate matter; however they are not designed primarily for that use. If sediment problems exist, a multimedia or FilterAg sediment filter should be installed ahead of the carbon filter.

Catalytic Carbon retains all of the adsorptive properties of conventional activated carbon, but it combines them with the ability to promote or catalyze chemical reactions. During the treatment process, catalytic carbon first adsorbs sulfides onto the carbon surface. Then, in the presence of dissolved oxygen, it oxidizes the sulfides and converts them to nonobjectionable compounds. Our catalytic carbon filters are specially formulated for hydrogen sulfide reduction.

FILTRATION CAPACITIES:

Chlorine — One cubic foot of activated carbon will treat one million gallons of water at a chlorine level of one part per million.

Taste & Odor — 0.2 pounds of carbon will treat 1000 gallons of water.

Fleck Model 5600 Water conditioning control (on certain models)

Valve Specifications
Valve Material	Noryl®
Inlet/Outlet	3/4" NPT (Female)
Cycles*	{enter info}
Flow rates (50 PSI Inlet) - Valve Alone
Continuous (15 PSI Drop)	20 gpm
Peak (25 PSI Drop)	26 gpm
CV**	5
Max.Backwash (25 PSI Drop)	7 gpm
Regeneration
Downflow/Upflow	Both
Adjustable	Time of regen and brine flow only.
Time Available	120 minutes
Meter Information
Meter Accuracy Range	.25 - 15 gpm +/- 5%
Meter Capacity Range	Standard: 125-2,125 gal. Extended: 625-10,625 gal.
Dimensions
Distributor Pilot	13/16" or 1" (1.050) Pipe O.D.
Drain Line	1/2" NPT (Female)
Brine Line	3/8"
Mounting Base	2-1/2"-8 NPSM
Height from top of tank	7"
Tank Application - can regenerate/backwash the following
Water Softener	6"-12" diameter
Iron Filter	6"-10" diameter
Sediment Filter	6"-10" diameter
Carbon Filter	6"-10" diameter
Neutralizing Filter	6"-10" diameter
Additional Information
Electrical Rating	24v, 110v, 220v-5-Hz, 60Hz
Pressure	Hydrostatic: 300 PSI Working: 20 - 120 PSI
Temperature	34° - 110° F

**Cv-Flow rate of valve alone at 1 psi pressure drop

Shop securely at Excelwater.com