|
This modular line of UV disinfection systems can be used in a myriad of applications where flexibility and pricing sensitivity are deciding factors. The small S2Q-PA systems are ideal for point-of-use filtration, while the larger systems can be used as a point-of-entry system to disinfect the water for an entire home or cottage.
- Models to treat up to 12 GPM
- Environmentally friendly
- No harmful chemicals
- Does not change water's taste, color or odor
Price:
S2Q-PA (up to 2 GPM) $245
S5Q-PA (up to 5 GPM) $295
S8Q-PA (up to 8 GPM) $410
S12Q-PA (up to 12 GPM) $525
Order Now! 
Sterilight UV Replacement Lamps and Parts
Sterilight Product Specifications
Download Sterilight Owner's Manual
Sterilight™ SQPA Ultraviolet Disinfection Systems
Features:
- flow rates up to 12 gpm (44 l/min) in clear fresh water
- NEW electronic "ICE" ballasts featuring open loop current control (patent pending), ballast features IEC connector, audible alarm & power-on indicator
- hard glass, low pressure mercury vapour UV lamps with high isolation pin design
- quick-lock moulded lamp connector
- compact design incorporating 304 stainless steel reactor chambers, brilliantly polished for laboratory or medical applications
- easy servicing - no need to disconnect water flow to change UV lamp
- open end quartz sleeves and aluminum gland nuts for optimum operating temperature and sealing efficiency
- 99.99% destruction of bacteria, virus, and protozoan cysts (Giardia lamblia & cryptosporidium) at rated flow
- natures way to protect your water without the addition of harmful chemicals
- includes mounting clamp
- seven year warranty on reactor chamber for unparalleled protection
- product certified by CSA (C US) and CE
The
new Sterilight Platinum "SPV" series carry NSF/ANSI Standard 55,
Class A certification. A total of eight systems are available with flow
rates from 1.5 to 20 gpm. Whether you are looking for a point-of-use disinfection
system or a high-flow point-of-entry system, Sterilight's "SPV"
Platinum systems have you covered.
These validated systems carry a 40 mJ/cm2 UV dose at the alarm set-point
as dictated by NSF/ANSI Standard 55 test protocol. Systems offer a 4-log reduction (99.99%) in
bacteria, virus and protozoan cysts (Giardia lamblia and Cryptosporidium).
- NSF Standard 55, Class A certified
- Models to treat up to 20 GPM
- Environmentally friendly
- No harmful chemicals
- Does not change water's taste, color or odor
Price:
SPV-1.5 (up to 1.5 GPM) $995
SPV-2.5 (up to 2.5 GPM) $1025
SPV-3.5 (up to 3.5 GPM) $1055
SPV-6 (up to 6 GPM) $1090
SPV-8 (up to 8 GPM) $1145
SPV-12 (up to 12 GPM) $1225
SPV-15 (up to 15 GPM) $1295
SPV-20 (up to 20 GPM) $1375
Order Now!
See System Components Here
Sterilight Platinum Specifications
Sterilight UV Replacement Lamps and Parts
Sterilight Platinum™ "SPV" Ultraviolet Disinfection Systems
Features:
- flow rates of 1.5, 2.5,
3.5, 6, 8, 12, 15, and 20 gpm
- high output coated UV
lamps
- 316L stainless steel
electropolished axial flow reactors
- electronic controller
with graphical Smart-SwitchTM interface
- 2-stage flow pacing
with Flow-PaceTM UV sensor
- over molded connector
with built-in safety interlock switch
- NSF/ANSI certified
under Standard 55, Class A
- 316L stainless steel flow restrictors
- 99.99% destruction of
bacteria, virus, and protozoan cysts (Giardia lamblia & Cryptosporidium)
at rated flow
- natures way to protect
your water without the addition of harmful chemicals
- seven year warranty on
reactor chamber for unparalleled protection
- product certified by
CSA (C US) and to CE standards
The Cobalt™ "BASIC" line of disinfection systems incorporate high-output UV lamp technology coupled with efficient axial flow reactors. This modular line of UV disinfection systems in flow rates of 8-40 gpm (30.3-151.4 lpm), are ideally suited for commercial/industrial, point-of-entry applications with high flow rates and constant flow demands.
The Cobalt™ "PLUS" line also includes a UV intensity monitor for conditions where water quality is unknown and/or a monitoring system is required.
- Cobalt "BASIC" or "PLUS" controller
- Models to treat up to 40 GPM
- "PLUS" models with UV intensity monitor
- LED display shows lamp life remaining
- 304 axial flow stainless steel reactors
- Sterilume -HO "high-output" coated lamps
- 100-240V/50-60Hz universal power input
- Compact design requiring small installation footprint
Order Now!
Sterilight Cobalt "BASIC" Specifications
Sterilight Cobalt "PLUS" Specifications
Sterilight Cobalt Owner's Manual
Sterilight UV Replacement Lamps and Parts
The SUV series high flow commercial/industrial sterilizer is designed for applications requiring a 99.99% reduction of bacteria and viruses. This process is accomplished without adding any potentially harmful chemicals to your drinking water. Sterilight is the most ecological way of treating your water.......and all this just for pennies a day!
Applications include private wells, camp grounds, hotels, bottlers, aquaculture, hospitals, food, cottages, restaurants, breweries, water systems, laboratories, marine, pharmaceutical, dairies and many other applications.
- Models to treat up to 1,000 GPM
- Environmentally friendly
- No harmful chemicals
- Does not change water's taste, color or odor
Price:
SUV 24P (up to 30 GPM) $2295
SUV 40P (up to 50 GPM) $3095
SUV 65P (up to 80 GPM) $3995
SUV 100P (up to 125 GPM) $4495
SUV 225P (up to 280 GPM) $11575
SUV 400P (up to 500 GPM) $19995
SUV 600P (up to 750 GPM) $24295
SUV 800P (up to 1000 GPM) $29350
More Details
Shop securely at Excelwater.com
|
