How Does Water Get To My Faucet?
In a typical community water supply system, water is transported under pressure through a distribution network of buried pipes. Smaller pipes, called house service lines, are attached to the main water lines to bring water from the distribution network to your house. In many community water supply systems, water pressure is provided by pumping water up into storage tanks that store water at higher elevations than the houses they serve. The force of gravity then "pushes" the water into your home when you open your tap. Houses on a private supply usually get their water from a private well. A pump brings the water out of the ground and into a small tank within the home, where the water is stored under pressure.
Making My Water Safe
Water suppliers use a variety of treatment processes to remove contaminants from drinking water. These individual processes may be arranged in a "treatment train" to remove undesirable contaminants from the water. The most commonly used processes include filtration, flocculation and sedimentation, and disinfection. Some treatment trains also include ion exchange and adsorption. A typical water treatment plant would have only the combination of processes needed to treat the contaminants in the source water used by the facility. For more information see our article on the Water Treatment Process.
Drinking water comes from surface water and ground water. Large-scale water supply systems tend to rely on surface water resources, and smaller water systems tend to use ground water. Including the approximately 23 million Americans who use ground water as a private drinking water source, slightly more than half of the population receives its drinking water from ground water sources. 
