Water Purification Systems for Small to Medium-sized Water Store or Bottling Plant
 The bottled water segment is the fastest growing area of the beverage market. Of the 100 million beverage industry, bottled water is nearly 7.6 billion annually, and forecast to grow over 50% over the next 5 years.
This explosive growth has generated a tremendous demand. The potential market place throughout the world is unlimited. Bottled water is required to accommodate the needs and requirements of an ever-growing population, as the quality of drinking water is reduced.
Excel Water Technologies Inc. will provide you with all the required solutions for your water bottling business. We can provide Reverse Osmosis
systems with capacities ranging from 800 GPD to 12,000 GPD and up. These
systems are ideal for small and medium-sized water stores or bottling operations.
Wherever good water purity is required, our systems will typically output water in the 2 to 10 PPM TDS range. This assumes an input water TDS under 1000 PPM.
In order to produce a product which meets the required water quality standards, commercial Reverse Osmosis systems must integrate various processing stages. The following chart describes these stages.
Preconditioning Stage
The proper preconditioning of your water is critical to the smooth and safe operation of your business. Improperly treated input water can cause serious damage to the various components of your reverse osmosis system, and would surely compromise the quality of your product water.
A complete analysis of your incoming water supply is essential. This will determine what elements are present and what pre-treatment is necessary to remedy any problems.
A typical standard preconditioning package consists of:
- Multi-media filter to remove sediment and particulate matter
- Water softener to eliminate excess mineral content
- Carbon filter to remove any organic chemicals (chlorine, pesticides, etc.)
In some cases, additional preconditioning may be needed. For example, the presence of bacteria or iron in the incoming water would require treatment with ultraviolet light and specialized iron filters, respectively.
Disinfection Stage
The disinfection stage is an essential component of any drinking water processing operation. Since the water exiting the reverse osmosis system will be stored in a closed tank, it is susceptible to stagnation and biological contamination.
To remedy this, some combination of Ultraviolet and/or Ozone disinfection is required. As in the preconditioning stage, this equipment can be purchased "stand-alone" if needed. However, some of the reverse osmosis systems we supply (see below) are optionally configurable with UV and Ozone modules.
Reverse Osmosis Stage
The main focus of our commercial reverse osmosis systems is the small to medium-sized water store or bottling operation.
The typical water store requirement will be in the 800-3000 gallon per day range. Bottling operations will generally require 1500-12,000 GPD capacity and higher.
Typical Reverse Osmosis System
(no preconditioning or disinfection)
These systems are installed where the customer already has, or wishes to purchase separately, the pre-treatment and disinfection components.
Click here for Specifications and Pricing
Bottle Rinsing/Washing/Filling Equipment
Our high quality, stainless steel bottled water products provide an affordable entry-level solution to your or your customers' bottle rinsing, washing and filling needs. We have systems for your clean area as well as for customer self-service.
Contact us with your inquiries: info@excelwater.com
|
