NEW:
Freedom 100 PET Large-bottle Blow Molding
Machine Reduces Costs, Saves Storage
Space
Overview:
The Freedom 100 PET large-bottle
blow molder is ideal for bottling plants
looking to greatly reduce bottle costs
by switching to PET from PC bottles
and manufacturing them on site.
System Benefits:
• Reduced cost per bottle
increases bottom-line by 25-50% (from
$6.501PC bottle to approximately $2.501PET
bottle). When shipping empty 5-gallon
PC bottles in a 40' container only 2000
can be loaded. But up to 15,000 PET
preforms can be shipped in the same
sized container, greatly reducing shipping
costs.
• Tighter inventory control; make
your own bottles when you need them,
minimizing inventory storage and vendor
delivery problems.
• PLC controls blow molding process
for precision heat control, speed.
• Built primarily of stainless
steel; easy to clean and maintain.
• Easy to use. One operator. (Approximately
30-sec. between emerging heated preforms,
to allow operator to blow bottle and
return for the next one.)
• Environmentally friendly; PET
bottles are easily crushed and recycled.
Specifications:
Blower Motor
| Actual size: |
Shipping size |
| H: 82 (208 cm) |
88 (224 cm) |
| W: 25 (188 cm) |
35 (89 cm) |
| D: 90 (229 cm) |
100 (254 cm) |
Pre-heater
| Actual size: |
Shipping size |
| H: 74 (188 cm) |
80 (203 cm) |
| W: 29 (74 cm) |
39 (99 cm) |
| D: 114 (290 cm) |
124 (315 cm) |
Electrical Voltage
220 3-phase 60 hz, 380 3-phase
50hz (other voltages available)
AMPS-FLA 120A (recommened service 150
amps)
Air
Air-Pressure -- 450 psi (3.1
Mpa)
Volume -- 50 CFM
Quality -- oil-less, clean and dry
Rate -- 100 bottles per hour
(actual speed depends on bottle design
and operator capability)
Contact
us for a quote.
| 
